新聞中心
THK直線導軌值得購買的優勢是什么?
來源:http://www.traderpanda.net/ 日期:2020-09-08 發布人:
由于THK直線導軌以滾動方式摩擦,因此縮小這些間隙是提高精度的重要指標。以下是THK直線導軌制造商向您介紹的主要購買點:
Due to the friction of THK linear guide in rolling mode, reducing these gaps is an important index to improve the accuracy. The following are the main purchase points introduced to you by THK linear guide manufacturer:
傳統的直線導軌不可避免地導致平臺運動精度由于油膩的回流效應而變差,并且運動軌道接觸面的潤滑是由于運動過程中潤滑不足造成的,嚴重影響了精度。滾動導軌的磨損非常小,因此機器可以長時間保持精度。
The traditional linear guideway inevitably leads to the poor motion accuracy of the platform due to the greasy backflow effect, and the lubrication of the contact surface of the moving track is caused by insufficient lubrication during the movement, which seriously affects the accuracy. The wear of the rolling guide is very small, so the machine can maintain the accuracy for a long time.
日本THK直線導軌的優勢:
Advantages of Japanese THK linear guideway:
它適用于高速運動,大大降低了機器所需的驅動馬力。由于直線導軌移動,摩擦力非常小,床可以用較少的動力操作,非常是當床在常規的往返操作中工作時??梢燥@著降低機器的功率損耗。并且由于其摩擦產生的熱量很小,它可以應用于吹瓶機高速運轉。


It is suitable for high-speed movement and greatly reduces the driving horsepower required by the machine. Due to the movement of the linear guide, the friction force is very small, so the bed can be operated with less power, especially when the bed is working in the normal round-trip operation. It can significantly reduce the power loss of the machine. And because the heat generated by friction is very small, it can be used in the high-speed operation of bottle blowing machine.
它可以同時承受上,下,左,右方向的負載。由于直線導軌采用特殊的梁結構設計,可同時承受上,下,左,右方向的載荷。與直線導軌不同,可以在平行接觸面的方向上承受的橫向載荷很輕,這很容易引起機器。運行精度差。日本THK直線導軌提醒器:導軌的接觸面是直的如果沒有提供足夠的潤滑劑,會造成一些損壞。
It can bear the load of up, down, left and right at the same time. Because the linear guide adopts special beam structure design, it can bear the load of up, down, left and right directions at the same time. Different from the linear guideway, the lateral load that can be borne in the direction parallel to the contact surface is very light, which is easy to cause the machine. The operation accuracy is poor. Japanese THK linear guide reminder: the contact surface of the guide rail is straight, if not provided with enough lubricant, it will cause some damage.
- 上一篇:直線導軌維護及保養的要求標準是什么?
- 下一篇:滾珠絲杠的傳動機構是什么?
相關新聞 /RELATED TO RECOMMEND
導軌絲杠選型必看!滾珠絲杠研磨級VS軋制級,選錯多花冤枉錢還影響精度
2026-05-04
導軌絲杠選型避坑!滾珠絲杠為何普遍不加減速機?附電機驅動選型案例
2026-05-03
滾珠絲桿裝配錯1步=精度報廢,導軌絲杠精密裝配全流程,零間隙實操指南
2026-04-27
導軌絲杠:精密傳動界的扛把子,聊聊滾珠絲桿的那些事
2026-04-24
導軌絲杠:滾珠絲杠副冷卻結構設計及溫升影響分析
2026-04-22
導軌絲杠選型避坑,梯形VS滾珠絲桿核心區別,90%從業者都選錯
2026-04-20
導軌絲杠裝配避坑!全流程實操詳解,80%的故障源于裝配不規范,一次達標不返工
2026-04-13
導軌絲杠 | 滾珠絲杠避坑指南!原理吃透不踩雷,高精度傳動99%的人都沒搞懂核心邏輯
2026-04-08
導軌絲杠選型避坑!四步法合理選型,90%工程師都在用,杜絕動力不足、共振隱患
2026-04-07
別再瞎選導軌絲杠!垂直安裝不設防墜,幾千斤負載直接砸穿設備
2026-04-06
滾動 vs 滑動:導軌絲杠選錯,磨損翻倍、維護成本直接飆升
2026-03-27
導軌絲杠:人形機器人直線運動核心,一步穩不穩全看它
2026-03-26




