In ball screw manufacturing, how to better design and manufacture the ball screw, in the ball screw, we need to have the following several main clarifications, master the following six points, will let our ball screw, more perfect display.

一：滾珠絲杠設，要思索周密、具體，滾珠絲杠設計方案一經評論經過就不要隨便更改，尤其不要在后期更改，更改能夠遷延施工、添加費用、甚至影響揭幕。預算經常是矛盾之源。預算和設計之間能夠有很大差距。作為滾珠絲杠設計人員，必需實際地承受預算，在預算內全力做好設計任務。假如預算不清晰，并不料味沒有限制。這很能夠形成良多費事。假如設計施工開支過多，滾珠絲杠設計人員應承當責任。因而，要對峙弄清晰預算規范，節制開支，事前布置一切項目及規范，在預算內做好設計施工任務。

1： When designing the ball screw, it is necessary to think carefully and concretely. Once the ball screw design scheme is reviewed, it should not be changed casually, especially in the later stage. The modification can delay the construction, add costs and even affect the unveiling. Budgets are often the source of conflict. There can be a big gap between budget and design. As a ball screw designer, we must bear the budget and do the design task well in the budget. If the budget is not clear, there is no limit. This can be a lot of trouble. If the design and construction cost is too much, the ball screw designer should be responsible. Therefore, it is necessary to clarify the budget specification, control expenditure, arrange all projects and specifications in advance, and do well in the design and construction tasks within the budget.

二：滾珠絲杠設計簡略清楚明了

2： Ball screw design is simple and clear

簡練、明快是吸引觀眾的更好方法。普通人在霎時只能承受有限的信息。觀眾行走慌忙，若不克不及在霎時取得明白的信息，就不會發生興致。別的，機械設備復雜也輕易降低機械設備人員的任務效率。展品要選擇有代表性的陳設，必需有選擇，必有所舍棄。相片、圖表、文字闡明該當明白、簡練。與展出目的和展出內容無關的設計裝飾應削減到水平。

Conciseness and lightness are the best ways to attract the audience. Ordinary people can only bear limited information in a moment. The audience is in a hurry. If they can't get clear information in an instant, they won't be interested. In addition, the complexity of mechanical equipment also easily reduces the task efficiency of mechanical equipment personnel. If you want to choose representative furnishings, you must have a choice, you must give up. Photos, charts and text should be clear and concise. The design and decoration irrelevant to the exhibition purpose and content should be reduced to the minimum level.

三：滾珠絲杠設計要凸起有

3： The design of ball screw should be raised and focused

滾珠絲杠應有中間、有核心。機械設備的核心可以吸引留意。核心選擇應效勞于展出目標，普通會是特殊的產物、新產物、更主要的產物或許被注重的產物。經過地位、安插、燈光等伎倆凸起。另一方面看就是運用適宜的顏色、圖表和安插，用協調一致的方法以形成一致的印象。

Ball screw should have middle and core. The core of mechanical equipment can attract attention. The core selection should serve the exhibition target. The general meeting is a special product, a new product, or the most important product that may be paid attention to. Through the position, placement, lighting and other tricks to highlight the focus. On the other hand, it is the use of appropriate colors, charts and placement, with a coordinated approach to form a consistent impression.

四：滾珠絲杠設計要共同

4： Ball screw design should be common

異乎尋常能吸引更多的觀賞者，便觀賞更輕易辨認尋覓，使走進機械設備的觀賞者也會留下印象，并在后會被觸及回想。設計要共同，然則不要離開展出目的和貿易形象。

Unusual can attract more viewers, so it is easier to identify and search, so that visitors who enter the mechanical equipment will also leave an impression, and will be touched and recalled later. Design should be common, but do not leave exhibition purpose and trade image.

五：滾珠絲杠設計要從目的觀眾的角度動身

5： Ball screw design should start from the perspective of the target audience

展出成功與否在很大水平上靠觀眾的興致和反響。滾珠絲杠設計要思索人，首要是目的觀眾的目標、心情、興致、觀念、反響等要素。從目的觀眾的角度進行設計，輕易惹起目的觀眾的留意、共識，并為目的觀眾留下比擬深的印象。

The success of the exhibition depends on the interest and response of the audience to a great extent. The design of ball screw should consider human beings, and the most important factor is the target audience's goal, mood, interest, concept and response. Design from the perspective of the target audience can easily arouse the attention and consensus of the target audience and leave a deep impression on the target audience.

六：滾珠絲杠設計要思索空間

6： Space should be considered in ball screw design

滾珠絲杠設計人員還要思索機械設備任務人員數目和觀賞看數目。擁堵的機械設備效率欠好，還會使一些目的觀眾落空興致。反過來空蕩的機械設備也會有一樣的結果。對此，機械設備面積是首要要素。

Ball screw designers should also consider the number of mechanical equipment task personnel and viewing number. The efficiency of congested machinery and equipment is not good, and some target audience will be disappointed. In turn, empty machinery will have the same result. In this regard, the area of mechanical equipment is the primary factor.

好的滾珠絲杠設計，是有一個統籌的思索，更好的更完滿的掌握每一個產物的細節，讓產物獲的展現。

Good ball screw design, there is a comprehensive thinking, better and more perfect grasp of the details of each product, so that the product can be shown
關鍵詞：導軌絲杠