Reduce rust

　　直接用手拿取直線導軌時，要洗去手上的汗液，并涂以優異礦物油后再進行操作，在旱季和夏日非常要留意防銹。

　　When you take the straight-line guide directly by hand, you should wash the sweat from your hands and apply excellent mineral oil before operating. In dry season and summer, you should pay special attention to rust prevention.

　　環境干凈

　　Clean environment

　　直線導軌工作環境渣滓進入導軌，也會增加導軌的磨損，振蕩和噪聲。

　　Slag entering the working environment of linear guide rails will also increase the wear, vibration and noise of the guide rails.

　　裝配仔細
                                  

　　Assemble carefully

　　直線導軌在運用裝置時要認真仔細，不允許強力沖壓，不允許用錘直接敲擊導軌，不允許經過翻滾體傳遞壓力。 直線導軌運用適宜、準確的裝置東西盡量使用專用工具。

　　Linear guideways should be carefully used in the operation of the device, forceful stamping is not allowed, hammer is not allowed to directly hit the guideway, and pressure is not allowed to pass through the roll body. Linear guides should be equipped with appropriate and accurate devices and special tools should be used as far as possible.

　　以上是大概介紹，如需使用詳細操作流程請參閱產品手冊。

　　The above is an overview. For detailed operation procedures, please refer to the product manual.

　　報錯